2" trimmer
Item # 10-2

Our new 2" trimmer is a light, powerful tool designed to trim in hard to reach areas. Useful for customers restricted to using smaller air compressors. Comes equipped with an open guard. Dust extractor guard available upon request.

3" trimmer
Item # 10-3

These light, powerful air saws are recommended for trimming smaller, thinner parts and are used by companies which are restricted to using smaller air compressors. The 3" model offers the dust extractor guard feature.

4" heavy duty trimmer
Item # 10-4

This powerful dependable air saw has been designed for fast production trimming of FRP parts up to 1" thick. Over the past 25 years, this saw has become the most widely used hand held air saw in the industry. Comes with a blade and a dust extractor guard. Open guard available upon request.

5" heavy duty trimmer
Item # 10-5

Our second most popular trimmer ! Same powerful motor used on our 4" trimmer. Includes a 5" side spoked blade and a dust extractor guard.

6" Excalibur trimmer
Item # 10-6x

Our larger 6" Excalibur trimmer was designed for trimming FRP parts up to 1 5/8" of thickness. Comes with a Superspeed 1 blade and a dust extractor guard.

6 1/2" Excalibur trimmer
Item # 10-65x

Our larger 6 1/2" Excalibur trimmer was designed for trimming FRP parts up to 2" of thickness. Comes with a Superspeed 1 blade and a dust extractor guard.

8" heavy duty trimmer
Item # 10-8

Brand new! This hand held trimmer was desgined to cut FRP laminates up to 2,5" of thickness. Model sold with a Superspeed 1 blade and a dust extractor guard.

10" heavy duty trimmer
Item # 10-10

Brand new! This hand held trimmer was desgined to cut FRP laminates up to 3,5" of thickness. Model sold with a Superspeed 1 blade and a dust extractor guard.

High speed router
Item # 30-SE50

50 000 RPM high speed router with a 1/4 " collet chuck. Each unit is fitted with a dust extraction cowl for jig following. 1/4 " diamond coated router bit included. Excellent routing up to 1/4" thick laminate.

4" sander
Item # 40-DS45

This unique 4" diamond disc sander allows operator to grind/sand a flat FRP part and pick up over 95 % of the dust created when attached to a dust extraction system. Cutter depth can be adjusted from 0 to 1/8". Cutter 75-DS4 sold separately.

2 1/4" planer
Item # 40-DP35

Our diamond planing tool has an adjustable nylon face plate which allows operator to plane / grind an area 2 1/4" wide and 1/32" to 1/8" deep in a single pass. Unit comes equipped with a dust extractor guard. Cutter 45-DP214 sold separately.

Spindle Saw Trimmer
Item # 10-SP3

This powerful flange trimmer has been designed to trim flanges at production speed. It has an adjustable bottom plate designed to ride on the flat inside or outside surface of a part to make an accurate cut. This tool comes equipped with a 53-338 (3") integral spindle saw, and a dust extraction guard.

Flange trimmer
Item # 20-FT25

This flange trimmer has been designed to trim flanges at production speed. Our adjustable nylon guide base can be set to various flange widths. Possibility of trimming up to 4" wide. All spindle diameters are 3 1/2". For blade choices, refer to table. Blades are sold separately.

Backfacer - Flat parts
Item # 20-BF15

This heavy duty backfacer will machine accurate thicknesses in flat parts. Adjustable nylon back plate will accommodate up to 3/4" thick laminate. Width of cut determined by diameter of backfacing cutter. Cutters sold separately.

Backfacer - Curved of flat parts
Item # 20-BF10

This powerful unit allows operator to machine an accurate thickness in flat or curved FRP parts. Adjustable rollers will accommodate up to 3/4" thick laminates. Width of cut determined by length of router used. Standard diamond routers are available in 1 1/4", 1 1/2", 2" and 2 1/2" lengths. Routers sold separately. Unit comes equipped with dust extractor guard with 1 1/2" diameter dust pipe.